| Firm |
Description |
|
|
RTP PAGANONI SRL
+39 031 658234
Via Carlo Porta, 20
23861 Cesana Brianza (Lecco)-Italy
|
R.T.P. di Paganoni & C. S.N.C. has its headquarters in Cesana Brianza (LC) at no. 20 via C. Porta.Located in the industrial zone of the town, it is easy to reach from Milan (about 50 km away), Lecco (20 km), Como (30 km) and from Switzerland.The map alongside and road signs clearly indicating the name of the company will enable you to reach R.T.P. easily and quickly. |
|
|
VAN-DIES di A. Vanossi & C,
+39 031 3338246
Via Manzoni 28
22036 Arcellasco d'Erba (Como)-Italy
|
Albino Vanossi is considered one of the most qualified technicians in the production and utilization of tungsten carbide, and consequently in the cold reduction of metals. His know-how, accumulated over 50 years is renowned and recommended by a large number of operators all over the world. From this point onwards this know-how is available through VAN-DIES along with all of the advantages which derive from an intercompany relationship. |
|
|
Example stand - wiredrawing.net
+39 0341 580139
Manzoni n°75
23868 Valmadrera (Lecco)-Italy
|
Do you want your company to appear in this space? Take an online stand on wiredrawing.net, the international online fair for the wire tube and cable industry, from raw materials to finished products.
Your company name will rotate in this showcase on the 5 Homepages of the Network, and it will appear in your belonging pavilion. wiredrawing.net is a simple, economic and new generation instrument to increase the international visibility of your firm.
Click here to visit the example stand. |
|
|
TDE srl - Matrici, punzoni, metallo duro
+39 011 3110270
Corso Orbassano, 336
10137 Torino (Torino)-Italy
|
TDE was not set up just to supply equipment and tools for the permanent deformation of materials, but also to open up new horizons by establishing a more direct participation with interested customers. We have built up thirty years' experience in the sector of permanent deformation presswork. We have tackled numerous problems following the PROPOSAL OF SOLUTIONS and special requirements, all treated with exceptional discretion and confidentiality.TDE Srl stands out in Italy and abroad for its research and technological innovation and the encouraging results achieved. Our aim is to provide continuity and to offer our customers a constantly improved service. |
|
|
PAGANONI (Division of MARIO NAVA SPA)
+39 031 87 62 27
Strada dei Livelli 6
23842 Bosisio Parini (Lecco)-Italy
|
Paganoni, division of MARIO NAVA S.p.A., has specialised in performing wear resistant coatings on mechanical parts for drawing machines. |
|
|
EUROCARBIDE SRL
+39 0341 583082
VIA GAGGIO 63
23864 MALGRATE (Lecco)-Italy
|
EUROCARBIDE Srl: is specialized in designing and manufacturing tools and special equipment in tungsten carbide for wiredrawing and for any other application where a high resistance to fretting corrosion is required; in particular our products are meant for the sectors of cold-deformation of metals and presswork. |
|
|
Redies S.R.L.
+39 0362 852160
Via Cantore 31/33
20034 Giussano (Milano)-Italy
|
Our product range:Tungsten carbide diesNatural diamond diesMonocristalline synthetic diamond dies Polycristalline synthetic diamond diesMachines for processing diesInstruments for dies checking and equipment for dies washingServices and accessories for regrinding and repolishing diamond dies and tungsten carbide dies. |
|
|
IMAS srl
+39 011-3499987
Via G. Carducci 5
10092 Beinasco (Torino)-Italy
|
IMAS Srl pursues the objective of the "Total Quality", in every aspect of his, in the relationships with the clients. Quality doesn't mean, for us, entirely the respect and overcoming of the standards, but also facing productive dialogue to consider not the client as a code but a "partner" with which to collaborate to grow and to improve him. |
|
|
EUROLLS Spa
+39 0432 796511
VIA MALIGNANI 14
33040 Attimis (Udine)-Italy
|
New permanent Exhibitor: EUROLLS SpA manufactures a range of equipment, rolls and accessories for the following steel sectors: * Rolls for the cold rolling of wire, special profiles and sections * Rolls for the formation of welded ferrous and non ferrous pipes/tubes * Cold rolling cassettes for the production of ferrous and non-ferrous wire * Rolls for hot rolling area (guide rolls, non ferrous material etc.) * Equipment for production of cold rolled wire and welded lattice girders. |
|
|
Eurospecial Srl
+39 031 874616
Via Molinello, 1
23892 Bulciago (Lecco)-Italy
|
Eurospecial S.r.l. was established in 1997 by combining the 20-year experience of Casiraghi Ambrogio, Tentori Eugenio and Vergani Carlo in the field of special tools realization for screws pressing.Expertise, flexibility, sensitivity, innovation and continuous investments in technology and employees training and human resources have made Eurospecial S.r.l. the ideal supplier being able to satisfy its Client’s most different needs, both in terms of competence and quality and in terms of support and assistance with regard to construction and application issues.Thank to the wide range of its machinery equipment, Eurospecial S.r.l. can realize many different kinds of pieces (either of standard dimensions or from specific drawings or samples). |
|
|
Invimec Srl
+39 0444 376245
Via della Cultura, 17
36050 Sovizzo (Vicenza)-Italy
|
New permanent Exhibitor: New line rolling machines with the train system were developed (with a single motor or independently motorised heads), a range of models for profiling machines was created (also with more than one profiling head), along with a whole series of machinery for subsequent processes (incision, cutting, engraving, winding). |
|
|
Vassena filiere Srl (Dies)
+39 0341 583083
Via Paradiso 5
23864 Malgrate (Lecco)-Italy
|
VASSENA FILIERE Its name is synonym of quality in the production of dies and equipment for the drawing. The important result that rewards the enterprising dynamism of Giuseppe Vassena and makes "Vassena's of Malgrate", a concern that takes its stand among the leaders of the quality in its field.
|
|
|
Sala Punzoni s.r.l.
+39 0341 633237
Via Mazzini
23801 Calolziocorte (Lecco)-Italy
|
Founded in 1966 in Olginate, today the company is leader in Italy and in the international market of special punches manufacturing. Sala Punzoni’s products can be used in the wire deformation field (for bolts and nuts, screws and extruded parts) as well as in sheet metal piercing and cupping branch and in the electronic, aeronautic and medical sector. |
Virtual fair
Marketplace
Press room
Engineering
Fairs
InfoPoint
Enter
Archived news
Printable version
Feed Rss
Staff